To avoid torque steer, you should check the tire pressure and make sure it is the same on all four tires. This will ensure that they are rotating at the same speed and thus there will be no possibility of generating this awkward movement.
Torque steer is the unintended influence of engine force on steering, especially in front-wheel drive vehicles. This effect manifests as a sensation of pulling on the steering wheel or a deviation of the vehicle from the planned trajectory.
For example, during strong acceleration, the steering can be pulled to one side, which can annoy the driver and lead to accidents if it cannot be controlled.
Torque steer is directly related to the differences in the forces in the contact patches of the left and right drive wheels. The effect is most apparent when high torques are applied to the drive wheels, whether due to a high overall reduction ratio between the engine and the wheels, high engine torque, or some combination of the two.
Therefore, here we tell you some of the reasons why your car may have torque steer .
1.-Incorrect tire pressure
Low air pressure in one or more tires can create this problem. Improperly inflated tires can cause uneven loading, resulting in excessive steering when turning, this can cause your car to skid out of control.
2.- Worn tires
When one tire is more worn than the other, it can cause the steering wheel to turn more than one side. Additionally, tread wear reduces the contact area between the tire and the road surface, which can lead to uneven loading and excessive steering on some but not all vehicles.
3.- Defective alignment
Improper tire alignment can also lead to uneven loading and excessive steering on some vehicles.
If the tires are not straight, it will affect your vehicle and produce torque steer .